 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MPI-925A 250W AC-DC AT Power Supply 2.0 0.42 0.42 11.0 DC OUTPUT WIRES Industrial Power Supply 14.4 15.0 0.5 13.80 4-TAPPING#6-32 14.0 AC-DC 6.4 2.7 1.6 Features 4.8 0.5 11.5 *Input Voltage: 90~265VAC *Input Frequency: 47~63Hz *Inrush Current: Does not exceed 30A at 115VAC input or 60A AC input, at cold start 25oC *Safety: UL 1950 / CSA 22.2 No.234 / VDE EN60950 *Load Range: When all outputs are at 60% rated load *EMI: FCC class B / EN55022B condition, the +5V output is set between 4.90~5.10V and all *EMS: Level 3 of IEC-801, 802, 803, 804 other outputs are within the specified voltage accuracy range *Ripple And Noise: Peak to peak ripple and noise for each output is < 1% of each output voltage at rated load Output PIN 115~230VAC +5V Red *Line Regulation: < +/-1% at rated load with +/-10% change +12V Yellow in input voltage -12V Brown *Load Regulation: The output voltage load regulation is less -5V Blue than the values on the table when each output loading changes Black GND +/-40% from 60% rated load while all other outputs at 60% White P.G. rated load *Hold Up Time: 14ms typ. from the last AC line charging pulse to the point when +5V drops down to +4.75V Output Min. Rated Max. Tolerance Voltage Load Load Load *Output Power: Total DC continuous power is within 200W at +5V 1A 25A 30A +/-0.1V 40oC ambient temperature. If the input voltage is < 100VAC, +12V 0A 10A 12A +/-0.72V total DC continuous power should not exceed 180W -12V 0A 1A 2A +/-0.6V *Power Good Signal: Goes high 100~500ms after all DC -5V 0A 1A 2A +/-0.25V output is ready *Power Failure: Goes low 1ms before any DC output falls *Efficiency: > 65% at nominal line and rated load *Altitude: 10,000 feet *Protection: Built-in crowbar circuit automatically shuts down outputs to avoid damaging external circuits. Trip point of O.V.P. circuit is between 5.7~7.0V *Temperature: 0~+70oC (operating); -40~+75oC (storage) www..com *Humidity: 5~95%; non-condensing at 40oC (operating) *Connectors: AC Input/Output: Meets IEC 320/CEE 22 standard Tab Terminals: Female 0.250" x 0.032" CPU Board: Alex 8500-06 or equivalent device 3.5" Disk Drive: AMP 1-480424-0/171822-4 or equivalent device *Dimensions: 14.0 x 15.0 x 8.62 cm with +/-0.8mm and +/0.4mm tolerance between mounting holes *MTBF: 156,598 hrs. Safety Standards www.boser.com.tw 2.4 3.72 8.62 |
Price & Availability of MPI-925A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |